FAQs

We suggest using a non-abrasive sponge with hot water and soap. It is highly recommended to use a cloth with white vinegar to clean and avoid persistent stains.

  • White worktops in matt finish can be easily cleaned with any bathroom cleaning product.
  • We suggest cleaning shiny finished worktops with water or neutral detergents.
  • Abrasive sponges should be avoided.

Doccia guarantees the performance of their products for a period of 2 years. In the case Doccia confirms the imperfection of the product, the guarantee will cover its replacement. Purchase invoices issued by our company will be required for certifcation purposes.

*Doccia reserves the right to cancel the warranty under certain conditions. Please check with your assigned representant. 

Corner enclosure and bath shower dimensions are taken by measuring from the corner outward along both walls where the base will be installed and substracting 1 cm off each side. These instructions may be also applied for lateral fixed panels.

For enclosures that are going to be fitted between walls, you need to take three measurements (A and B in the diagram) at three different heights and substract 1 cm off the smallest one. Unevenesses between walls will be avoided by doing so.

Quadrant enclosure dimensions are taken from the corner outward along both walls (a and b in the diagram) in order to calculate the radius. If it is not possible to know the type of tray, you have to measure up the diagonal. The best option in any case is to draw a curve template.

We suggest using only water and a neutre detergent. Use a non-abrasive sponge or cloth. Water on glass should be dried with a soft cloth dampened in a lime-scale remover. Do not emply agressive products such as alcohol, bleach, solvent or abrasive sponges.